Chameleon SSD Optimizer Chameleon is an optimization tool for Solid State Drive on Mac OS X system. It can enable TRIM on non Apple-branded disks and increase durability by reducing I O writing cycles, set hibernate mode and save space disabling sleep image. Improve your Solid State Drive performance and lifetime. SSD optimization tool and TRIM enabler for any SSD on Mac OSX. Chameleon allow you to unlock trim on non-apple branded solid state drive, change hibernate mode and sleep image, set NOATIME, sudden motion sensor and disable Time machine. Read on for practical advice on optimizing your Mac for your brand new SSD. When you get your hands on the upgraded Mac, you'll immediately feel the difference in terms of speed – everything from the time it takes to boot up to how long an app takes to load. The most common mistake users make here is to use Time Machine (or their. Chameleon is a simple tool that allows you to speed up that third-party SSD drive. Mac: With the release of OS X 10.6.8, Apple introduced TRIM support for its solid state drives that makes the. Ssd optimizer free download - Chameleon SSD Optimizer, SSD, SSD, and many more programs. Enter to Search. My Profile Logout. CNET News Best Apps.
If you have replaced the hard drive on your Mac with an SSD (a very good move!) then you have already experienced how the flash storage enhances the overall user experience. However, to get the most out of your SSD and extend its lifespan, it’s wise to avoid the mistakes that most users make when installing a new flash storage disk. Read on for practical advice on optimizing your Mac for your brand new SSD.
When you get your hands on the upgraded Mac, you'll immediately feel the difference in terms of speed – everything from the time it takes to boot up to how long an app takes to load. The most common mistake users make here is to use Time Machine (or their preferred third-party backup system) to restore all the data that was previously stored on the HDD.
Download CleanMyMac X from MacPaw’s website and clean up to 500MB of junk data from your computer while enjoying all the features of the software without major limitations.
That's not the best way to get the most out of your SSD. The problem with this approach is that while you will get all your files and apps back, you’ll also inherit the old system's space-hogging legacy elements. Apps you never really used, huge mailboxes, that massive downloads folder you never cleared out will all get carried over this way, not to mention the cache files and junk data that had built up during the years of using the system.
Although it takes more time, the best way to maintain peak performance of your Mac and its new SSD is to carefully consider which apps you want to install. The same approach applies for files and folders, too. If you have iCloud enabled, this will be a seamless transition because all your files saved in iCloud Drive will appear on your refreshed Mac after signing in with your Apple ID. If not, then review them manually and copy only those that you really need. The rest can sit on an external drive.
The same goes for large files or folders, particularly videos and the Photos or iTunes library that occupy huge chunks of space but aren’t needed immediately. Photographers and video professionals can obviously skip this part, but the rest of us general users tend to store massive amounts of photos and videos that quickly fill up the limited space of the SSD. Unless you need to access these libraries on a daily basis, simply drop them on an external drive and keep that device to hand.
Although this is a neat feature of Time Machine, it is worth disabling unless you depend on local backups you. Local snapshots occupy too much precious storage space and may even interfere with plans to install Windows on a Mac, but the real catch is that macOS doesn't show how much space local snapshots are using and therefore makes it hard to figure out how much free space you have on the machine.
Also, keep in mind the limited number of write (P/E aka program/erase) cycles that SSDs have, which is usually around 10,000. Since local snapshots fill up the startup disk, macOS starts to delete them, which increases the number of writes that occur and therefore shortens the SSD's lifespan.
This is why it is wise to simply disable local snapshots. To do so, simply turn off Time Machine's automatic backups. Keep in mind, though, that you will need to manually select “Backup now” each time you connect the Time Machine disk to your Mac.
It may be tempting to quantify the speed improvements that an SSD brings but running various benchmarks just increases the number of writes and erases on the flash storage, which will obviously eat into its limited write cycle count. So, if you don't need to run a benchmark, just skip it. You'll feel the difference immediately after starting the machine.
You'll likely read on some blogs that turning off hibernation mode on laptops will optimize the SSD performance, but this is only party true: Apple designed hibernate mode to prevent data loss and it has three recommended settings. By default, the hibernate mode is set to “3” on MacBooks. There is one thing you should keep in mind with this, however: hibernate mode only activates in certain scenarios and its frequency depends on your usage. It’s not recommended to disable hibernation, but if you feel that it’s necessary, then do understanding the risk to any unsaved work.
Virtualbox mac on windows 7. Stay up to date on the latest tech news and discounts on Mac optimization software with our monthly newsletter.
Crucial-m500-iso-firmware-update-mu05-en. Crucial.com - SSD support. WARNING: The firmware update process is done entirely at your own risk.
Before initiating the update process be sure to backup or make copies of all important files. If the firmware process is interrupted your solid-state drive may not function properly. UEFI-based Systems: During validation of this firmware update we noticed instances where our update tools do not recognize the SSD with some systems using UEFI. The target device is not recognized as an updateable device during the reboot process. If this happens, the firmware update will not occur, and you’ll retain the firmware version you started with.
If you have a Dual Boot system we recommend using the Manual Boot Process as opposed to the Windows Update Utility. If you have more than one m4 in your system, note that the Windows Update Utility will update all eligible drives automatically. If you have questions or need assistance, please contact our Technical Support department.What is the best optimization ssd on OSX Maveri..7evenger wrote:I have a Macbook Pro 13' late 2010 and i have installed a SSD Crucial m500 240gb.
I read many blog for optimize my ssd on OS X but there are many discordance. I serch for an answer for : enabling trim, leep mode, sudden Motion sensor, noatime, disabling local time machine? Or leave everything original and use the ssd as a normal HDD? Thanks... The first thing you need to do is make sure your M500 has the most recent firmware.
The second thing you need to consider is that your SSD is not a normal HD. One of the issues peculiar to SSD's is that free space, both available to and not available to the user, is actually used for the various processes (including the wear leveling Kurt Lang mentions) you will have read about in the links above.Chameleon SSD Optimizer for Mac. TRIM Enabler for OS X Mavericks 10.9.2, Mountain Lion 10.8.x and Lion 10.7.x. # Original version by Grant Parnell is offline ( # Looks for 'Apple' string in HD kext, changes it to a wildcard match for anything # Alternative to # Method behind this madness described: # See discussion in comments here: # And here: # And here: sudo cp /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage.original.
iComputer Denver Mac & PC Computer Repair Services and IT Network Support. Here are a few tricks to squeeze the absolute best performance out of your SSD on a Mac OS.
Do not run benchmarks on your new SSD New SSD owners, right after they buy a new SSD, want to enjoy the speed and are eager to find out how much faster their new solid state drive is than the old hard drive. So in order to see the difference some people run extensive benchmarks to see the amazing performance numbers. Benchmarks usually write a lot of data to the disk (to test the write speed), and can wear out the drive. So it is the best way to ruin your SSD even before you start using it.Trim-support-SSD.doc.
How to Enable TRIM For All SSDs in OS X Mavericks. Ever since the release of OS X 10.6.8, Apple has been selectively enabling the TRIM command for SSDs in OS X.
This support continues on in OS X Mavericks, but as many have noted, it only seems to work for Apple SSDs by default. We’ll show you how you can enable TRIM across the board. What is TRIM? The TRIM command is an important disk command for SSDs that keeps your flash memory appropriately cycled so that you can achieve faster read and write speeds, as well as a longer lifespan for your SSD. As such, TRIM support is not the trivial matter that some make it out to be (although certain manufacturers, such as Other World Computing, include firmware that eliminates the need for OS-level TRIM support). How to Enable TRIM Via the OS X Terminal (Recommended) In you have an SSD that supports TRIM, follow the below instructions to enable it in OS X Mavericks. First, enter the command found in this document in the Terminal app on your Mac (found in Applications/Utilities).
Chameleon SSD Optimizer.