INDUSTRIES January 2014 Moore Industries' Fuse Protected USB Communication Cable provides the interface between a PC USB port and any of Moore Industries' PC-programmable interface instruments. In particular, it provides protection when programming Moore Industries' intrinsically safe products, as required by Ed6.0 of the IEC60079-11 standards. The application is usually installed in the C: Program Files (x86) Moore Industries SPA2 Configuration folder. Take into account that this location can differ depending on the user's choice. C: Program Files (x86) Moore Industries SPA2 Configuration uninst.exe is the full command line if you want to remove SPA2 Configuration. Convert Your PC or Mobile Device into a HART Communicator! With our Smart Communicator Software and a HART modem, you can use your PC, tablet, or smartphone as a full featured HART communicator at a fraction of the cost of a handheld communicator.
M-Audio USB MIDI Series is a driver for a big variety of M-Audio products. This is one of several driver packages that will replace MA_CAMIDI on Windows platforms. This driver is designed to replace any and all previous installations of M-Audio USB MIDI Series drivers upon launch. The following driver packages are uninstalled and replaced by this package: MA_CMIDI (Any Version).
KORG USB-MIDI Driver for Windows is the latest USB MIDI driver. This Windows driver is compatible with Windows Vista & Windows 7. The KORG USB-MIDI Driver for Windows is a free and easy to install driver utility developed by Korg Inc. With KORG USB-MIDI Driver for Windows you can use the korg usb-midi at the right parameters.
Moore Industries’ USB Communication Cable provides the interface between a PC USB port and any of Moore Industries’ PC-programmable interface instruments. Configuring the Moore Industries’ USB Communication Cable is simple. After install, the utility will startup minimized when Windows starts.
The Mellosoftron III is a low-latency, fully programmable,hardware-independent virtual sampler. It can be played witha MIDI controller, with the computer keyboard or with themouse, and driven by a sequencer or by a MIDI player.
The Maple virtual midi cable is a midi driver for Windows (95/98/Me/2000/XP/Vista/Win7, 32 bit only) that can connect any midi applications on your system. At this time 64 bit versions of Windows XP/Vista/7 are not yet supported. Maple virtual midi cable is freeware- you are very welcome to donate below if you like it.
M-Audio USB MIDI devices are divided into two categories based on differences in their hardware and firmware architecture: “Series I MIDI” and “Series II MIDI”.All Series II MIDI devices are class compliant for Windows XP, Windows Vista, Windows 7, and Mac OS X. This means that no driver is required for basic operation.
Macbreakz. With Stereoscope you can vastly improve your mixing experience by controlling your digital mixer remotely with mobile devices. It acts as a server that translates between simple OSC messages and mixer specific protocols. The mixer is connected to the host via Ethernet, USB or MIDI-Cable.
Sundog is a MIDI chords and melodies laboratory that can be used to experiment with new scales, harmonies, and melodies easily. This application is designed to work with all major DAWs. All note output happens via MIDI. Even without a virtual MIDI cable you can create new songs and phrases, as Sundog can export MIDI files directly to other programs.
The Configuration Utility is a powerful application that helps you to configure the Wireless Micro USB Adapter and monitors the link status and the statistics during the communication process. The tool is running on system tray after installation for easy access and customization.
The Advantech USB-4750 is a powerful data acquisition (DAS)module for the USB port. It features a unique circuit design and complete functions for data acquisition and control. This driver was developed to allow your PC interact with Advantech USB-4750 device. We recommend you install the software driver before you install the USB-4750 module into your system.
N150 Driver and Utility is a program designed for USB adapter N150. With this wireless adapter you can easily connect your desktop PC or notebook to a wireless network via USB. It supports wireless speed of up to 150 Mbps, provided your (modem) router supports a speed of 150 Mbps or higher. Create a secure connection to the router with just one push of the OPS (One Push Set-up) button.
USB-COM-Scanner-Driver is a program that automatically recognizes and associates with Datalogic Scanning USB-COM equipped products. It enables data coming from the USB port to be seen by the host like it is coming from a standard COM port (using a host defined virtual COM port).
USB card reader driver for Win XP/Vista/Win7 Driver (32/64 bits) Driver only (ZIP file)
This is the driver for AC1200 wireless adapter; using this hardware, you can easily upgrade your notebook or desktop PC to support 802.11ac, the latest generation Wi-Fi technology. Wireless-AC offers not only the fastest wireless speeds ever but also increased stability for your Wi-Fi connection.
USB-4761 is a digital input USB module with 8-channel relay and 8-channel isolated digital inputs; it has a wide input range of 5 to 30 Vdc. This driver must be installed in your PC to capture data from USB-4761. You can install DAQNavi SDK to develop applications that can capture data from its digital inputs and control devices using its relays.
USB2.0 Card Reader Software 6.0.6000.92
FlashBoot enables you to install Windows operating system on a USB storage device, empowering you to boot any PC from that device. It can either use a Windows installer disc or clone your existing Windows installation (including apps, settings, documents, games, browsers etc.).
loopMIDI is a tiny app that lets you create and use virtual loopback MIDI ports. In fact, it makes use of the virtualMIDI driver to create the virtual ports, but in addition to the virtual driver, it also offers a handy and neat way to control and configure the ports.